Nellcor™ flexible reusable SpO₂ sensor
The Nellcor™ flexible reusable SpO₂ sensor is a versatile sensor for short-term, continuous monitoring in a broad range of patient sizes.
Description
Integrates easily into your workflow
This reusable rubber pulse oximetry sensor is designed for short-term, continuous monitoring. Integrating easily into your workflow, it’s:
Forward and backward compatible with your existing Nellcor™-compatible monitors
Available in two sizes, large and small, for adult and pediatric patients weighing at least 20 kg (44 lbs)
Features
The Nellcor™ flexible SpO2 sensor is compatible with resistor callibration (RCAL) and Oximax™ technology, so you can easily use it with your existing Nellcor™-compatible monitors:
Two sizes: large and small1
A weight range of >20 kg (44 lbs)1
Two versions: home care and hospital/EMS1
OxiMax™ technology
Patients have a wide range of conditions that may impact respiration.
And because every patient is different, there are many different types of Nellcor™ pulse oximetry sensors with OxiMax™ technology available to help you choose the right sensor for the right patient.
Specifications
General1 | |
|---|---|
Length | Large and small, 925 mm, includes connector and sensor housing |
Patient weight ranges | The large and small sensors are intended for use on adult and pediatric (excluding infant and neonatal) patients weighing more than 20 kg or 44 lbs. |
Indications for use | Noninvasive continuous or spot-check monitoring of SpO2 and pulse rate |
Indicated for use with monitoring systems that use Nellcor™ Oximax™ and Nellcor™ compatible pulse oximeters | |
Led wavelength | Red: 660 nm peak |
Infrared: 885 nm centroid | |
Output power | 5 mW |
Environmental specifications1 | |
Operational temperature range | 0 to 40 C (32 to 104 F) |
Transient operating conditions | Sensor operates for 20 minutes at -20 C and 50 C |
Storage and transport temperature range | -40 to 70 C (-40 to 158 F) |
Relative humidity range | 15–95% non-condensing |
Atmospheric pressure range | 620 hPa to 1060 hPa |
Stabilization time (from storage to operational conditions) | Up to 20 minutes |
Cleaning1 | |
Dippable cleaning | It is necessary to clean and disinfect the sensor before attaching it to a new patient. Routine cleaning or low-level disinfection is recommended when using the sensor on the same patient. |
Accuracy1 | |
Pulse rate accuracy | 30–250 BPM: +/- 3 BPM1 |
Ordering information
Item number | Description | Size (mm) | Size (in) | Units per box |
|---|---|---|---|---|
Large | 23 × 40 | 0.9 × 1.5 | 1 | |
Large, home care | 23 × 40 | 0.9 × 1.5 | 1 | |
Small | 22 × 36 | 0.86 × 1.4 | 1 | |
Small, home care | 22 × 36 | 0.86 × 1.4 | 1 |
